Range Hood Installer in London
Cooker Hood Installation, Replacement & Ducting
Need a reliable range hood installer in London? We install and replace cooker hoods, extractor fans and kitchen ventilation systems for homes, flats and small commercial kitchens. If your hood is noisy, not extracting properly, or you’ve bought a new unit and want it fitted neatly and safely, we can help.
We cover ducted extraction (venting outside) and recirculating hoods (carbon filters), including advice on the best setup for your kitchen layout. We also handle common issues like poor suction, wrong duct size, backdraft, condensation, and bad smells that won’t clear.
Book Your Range Hood Installation
Range Hood Installation Pricing in London
Prices depend on hood type, duct length, wall/cabinet material, and whether a new external vent is needed. Below are common starting prices. For a fast quote, WhatsApp a photo to 07747178880.
Like-for-Like Hood Replacement
- Remove existing hood
- Fit new hood to existing position
- Basic checks & neat finishing
- Ideal when ducting is already in place
New Hood + Basic Duct Connection
- Fit new hood and connect ducting
- Seal joints and reduce air leaks
- Improve extraction performance
- Best for standard wall-mounted hoods
Recirculating Hood Setup
- Install hood in recirculation mode
- Fit / advise on carbon filters
- Reduce odours in small kitchens
- Great when venting outside isn’t possible
Important: If your job needs a new core drill hole, external grille, extra-long duct run, a cupboard modification, or a new fused spur, we’ll explain clearly before work starts.
Professional Range Hood Installers in London
At Range Hood Installer London, we focus on proper kitchen ventilation. A cooker hood isn’t just about looks—it helps remove steam, grease, cooking odours and heat. If installed incorrectly, it can be noisy, leak grease, recirculate smells, or fail to clear moisture (leading to mould and sticky kitchen surfaces).
We install and replace hoods in London kitchens of all sizes—apartments, family homes, rental properties, and small commercial spaces. Whether it’s a chimney hood, integrated canopy, telescopic hood, island hood, or downdraft extractor, we aim for a neat fit, strong extraction, and a safe electrical connection.
What Is Range Hood Installation in London?
Range hood installation means fitting a cooker hood securely above your hob and connecting it correctly so it can remove steam and cooking fumes effectively. Some hoods extract air outside through ducting (best performance), while others recirculate the air through carbon filters (useful when external venting isn’t possible).
Our range hood installer London service covers the full setup: correct mounting, positioning, duct connections, sealing, choosing appropriate duct size, reducing vibration noise, and ensuring the power supply is safe and suitable. The goal is simple—strong airflow, reduced smells, less grease, and a kitchen that stays fresher.
- ✓ Cooker hood installation and replacement in London
- ✓ Ducted extraction or recirculating setup
- ✓ Duct routing, sealing and airflow improvement
- ✓ Reduce noise, vibration and air leaks
- ✓ Neat finish around cabinets and chimney covers
For the fastest quote, WhatsApp a photo of your hob area and hood model to 07747178880.
Why Choose Our Range Hood Installer Service in London?
Correct Positioning & Height
We set the hood at a practical height for safe cooking, strong capture of steam/grease, and a clean look over your hob.
Better Extraction Performance
We reduce airflow restrictions, check duct sizing, seal joints properly and avoid common mistakes that kill suction.
Less Noise & Vibration
Loose mounting and bad ducting can make hoods loud. We secure the unit properly and minimise rattles where possible.
Safe Power Connection
We ensure the hood is connected safely and can advise if a fused spur or isolation is needed for a tidy, compliant setup.
Neat Finish
We aim for clean lines around cupboards and wall edges, tidy ducts, and a professional final look.
London-Wide Coverage
We cover Central, North, South, East and West London—ideal for homes, rentals, refurbishments and small businesses.
Types of Range Hood Installations We Do in London
Chimney Hood Installation
Wall-mounted chimney hoods are popular in London kitchens. We mount securely, align properly, connect ducting where available and finish neatly for a premium look.
- • Secure wall fixing and alignment
- • Duct connection and sealing
- • Improve suction and reduce leaks
- • Tidy finishing around chimney cover
Integrated / Canopy Hood
Integrated hoods sit inside cabinets and need careful spacing and neat installation. We fit the unit, ensure airflow is not choked, and route ducting correctly.
- • Cabinet fitting and alignment
- • Reduce vibration and rattles
- • Duct routing in tight spaces
- • Clean finish under the cabinet
Recirculating Hood Setup
When venting outside isn’t possible, we configure recirculating mode properly and advise on carbon filters to help reduce odours.
- • Correct recirculation configuration
- • Carbon filter fit/advice
- • Reduce cooking smells
- • Ideal for some flats and rentals
Why Proper Range Hood Installation Matters
Cooking creates steam, grease particles and strong odours. Without effective extraction, moisture builds up and can cause condensation, peeling paint, sticky surfaces and even mould—especially in compact London kitchens.
A correctly installed hood improves air quality, reduces lingering smells, and keeps your kitchen cleaner. The details matter: duct size, bends, backdraft prevention, sealed joints, and correct height above the hob can make a huge difference to how well the hood performs.
Better capture of steam and fumes makes your kitchen and home feel fresher, especially in open-plan spaces.
Good extraction helps reduce grease settling on cabinets, walls and ceilings, saving cleaning time.
Removing steam helps reduce condensation and damp issues in kitchens and adjacent rooms.
What’s Involved in Range Hood Installation in London?
Assessment & Quote
We confirm the hood type (chimney/integrated/island), whether it’s ducted or recirculating, and your kitchen layout. For speed, WhatsApp photos to 07747178880 and we’ll give a clear quote.
Mounting & Positioning
We mark out the correct position, ensure secure fixing into suitable material, and align the hood so it sits straight above the hob. This helps capture cooking fumes effectively and looks professional.
Ducting / Recirculation Setup
For ducted systems, we connect and seal ducting to reduce leaks and improve airflow. For recirculating hoods, we configure it correctly and advise on filter setup for odour reduction.
Testing & Final Finish
We test speeds, check noise/vibration, confirm airflow direction, and tidy the install for a clean final finish. We also explain filter maintenance and basic care tips.
How Long Does Range Hood Installation Take in London?
Quote & Planning
Send photos of your hob area and hood model for a quick price and booking time.
Standard Installation
Most cooker hood installs take 1–2 hours, depending on mounting, alignment and connection method.
Ducting / Extra Work
Long duct runs, new vent exits, or cabinet modifications can increase the time—always explained before starting.
Typical Appointment Timeline
When Do You Need a Range Hood Installer in London?
🍳 New Cooker Hood Purchase
If you’ve bought a new hood (chimney, integrated, island), we can fit it correctly and neatly with the best airflow possible.
🔁 Replacement of Old or Noisy Hood
Old hoods often get noisy and ineffective. We replace them and ensure the new unit is secured properly and extracting well.
💨 Poor Extraction / Smells Not Clearing
Weak suction is often caused by leaks, crushed ducting, wrong duct size, or bad routing. We can improve the setup.
🏢 Renovation & New Kitchen Install
New kitchens need proper ventilation. We install hoods as part of refurb work with neat finishing around cabinets and walls.
🏙️ Flats With No External Vent
If you can’t vent outside, we set up recirculating mode properly and advise on filters for best odour reduction.
🧱 New Ducting Route Required
If your hood needs a new duct route or vent exit, we can advise on practical options and carry out the work where feasible.
How Range Hood Installation Is Carried Out in London
We start by checking where the hood will sit, the wall/cabinet structure, and how the airflow will be managed. We then mount the hood securely, connect ducting or configure recirculating mode, and test the unit for performance.
We aim to reduce common issues like air leaks, noisy vibration, and weak suction. Where possible we advise on practical improvements like shorter duct routes, fewer sharp bends, correct duct diameter, and fitting a backdraft shutter to help prevent cold air coming back into the kitchen.
Quality & Safety Steps
- ✓ Secure fixing into suitable wall/cabinet structure
- ✓ Clean duct connections and sealed joints
- ✓ Reduce vibration and rattles where possible
- ✓ Verify airflow direction and extraction strength
- ✓ Explain filter cleaning and replacement schedule
- ✓ Leave the work area tidy
Benefits of Professional Range Hood Installation in London
Stronger Extraction
Correct mounting and well-sealed ducting improves airflow and helps remove steam and cooking odours faster.
Cleaner Kitchen
Effective ventilation reduces grease settling on cabinets and walls, keeping your kitchen fresher and easier to clean.
Less Condensation
Removing moisture helps reduce condensation and damp issues—especially important in compact London flats.
Reduced Noise
Secure mounting and better duct routing can reduce rattling and vibration noise in many installations.
Neat Finish
A professional fit looks better and avoids gaps, crooked hoods, and messy ducting that ruins a new kitchen look.
London Experience
We’re used to London property layouts—tight cupboards, awkward duct routes and flats where ventilation options are limited.
Who Books a Range Hood Installer in London?
🏠 Homeowners
Upgrading kitchens, replacing noisy hoods, improving extraction, and keeping cooking odours under control.
🏢 Landlords & Letting Agents
Like-for-like replacements, recirculating upgrades, and reliable installs for rental properties.
🧑🍳 Renovation & Kitchen Fitters
New kitchen installs needing a clean hood fit, ducting connections and practical ventilation routing.
🏙️ Flat Owners
Recirculating hood setups where external venting is restricted or not allowed.
🍽️ Small Businesses
Small cafés and prep kitchens needing functional ventilation upgrades with minimal disruption.
🧼 People Tired of Smells & Grease
If smells linger for hours or cabinets feel sticky, a better hood setup can make a noticeable difference.
Range Hood Installer London – Location
Service Area: Greater London
Address: 22 Cowper St, London EC2A 4AP
Phone: 07723439390
Service Radius: 25 miles around Central London
WhatsApp: 07747178880
Client Reviews for Range Hood Installer London
"Great job fitting our new chimney hood. Everything is aligned perfectly and it extracts much better than our old one. Clean finish and no mess."
"Our old hood was loud and barely worked. The installer replaced it and improved the duct connection. Much quieter and the kitchen smells clear fast now."
"Quick booking and professional install. We couldn’t vent outside so they set up recirculation properly and explained the filter maintenance. Very helpful."
Key London Areas We Serve
Central London
Range hood installation in Soho, Covent Garden, Fitzrovia and Marylebone. Ideal for flats and townhouses needing better ventilation and a tidy finish.
West London
Cooker hood fitting across Kensington, Chelsea and Notting Hill—replacement hoods, duct connection improvements, and neat cabinetry installs.
City & East London
Shoreditch, the City and Canary Wharf—kitchen ventilation installs for busy households and rental properties with common ducting limitations.
Frequently Asked Questions – Range Hood Installer London
Yes. We fit customer-supplied cooker hoods across London. Send a photo and model number on WhatsApp to 07747178880 for a fast quote.
Prices typically start from £120 for like-for-like replacement. Ducting, new vents, or cupboard modifications can change the total—photos help us quote accurately.
In most cases, yes—ducted extraction usually performs better because it removes air outside. Recirculating can still help, especially with good carbon filters, when venting outside isn’t possible.
Common causes include loose mounting, poor duct connections, crushed ducting, or vibration against cabinets. We can secure the hood and improve the duct setup where possible.
Most installs take 1–2 hours. Jobs involving duct routing or new vent exits may take longer depending on access and wall type.
We can remove the old hood as part of replacement. If you want disposal, mention it when booking and we’ll advise options.
Yes. Integrated/canopy hoods are common. We fit them neatly and aim to keep ducting tidy and airflow efficient.
We often have same-week availability. WhatsApp your postcode and photos to 07747178880 to get booked in quickly.
No problem—recirculating mode may be the best option. We set it up correctly and advise on carbon filters for better odour control.
Please clear the hob area and ensure the new hood is on-site. Photos of the current setup help us bring the right fixings and duct parts.
Often yes. Weak suction can be caused by leaks, blocked filters, crushed ducting, wrong duct diameter, or poor routing. We’ll assess and suggest practical improvements.
Metal grease filters usually need regular cleaning (often monthly depending on cooking). Carbon filters in recirculating hoods typically need replacement periodically—frequency depends on use and filter type.
Yes. We provide tidy cooker hood replacement and installation for landlords and letting agents across London.
We accept common payment types including bank transfer and card/cash where available. If you need an invoice, just request it.
Yes—if you have multiple items, we can price a bundle job. Send details and photos to 07747178880.
Areas We Serve Near London
Baker Street
Cooker hood installation in Baker Street — clean fitting and better kitchen ventilation for flats and homes.
Bond Street
Range hood installer for Bond Street — professional fitting, replacement and ducting improvements.
Oxford Circus
Cooker hood fitting in Oxford Circus — chimney hoods, integrated hoods and recirculating setups.
Piccadilly Circus
Range hood installation in Piccadilly Circus — fast bookings and tidy finishing.
Leicester Square
Cooker hood replacement in Leicester Square — quieter operation and improved extraction.
Covent Garden
Range hood installer in Covent Garden — clean installs and practical ventilation advice.
Don’t see your area listed? We cover all of London and nearby regions within 25 miles.
Call to Check Coverage